DASCO Hardware Catalog_2016

Heavy Duty Commercial Mortise Locks

Features: • Non Handed • Stock 6 pin Schlage “C” keyway, drilled for construction keying • Door thickness 1-3/4” standard, other thicknesses available when specified • Backset 2-3/4 “ • Lock case Heavy gauge plated steel • Armored Front

Specifications: Mortise Locks – ML series.

All locks or latches are provided with 3 hour listed stainless steel dead latch or spring latch. Lock chassis shall be stainless steel, steel bar and cold rolled steel case with ball-bearing roller retractors.

Wrought stainless steel or brass- adjustable angle and attached by screws to the lock case front 1” throw, stainless steel with hardened anti-saw pins Stainless steel latch and anti-friction insert Push buttons- chrome plated brass Stainless steel or brass, 4-7/8” x 1-1/4” curved lip ANSI strike Stainless steel

Options: • Trim: 06, 17, 03, specify “A” for sectional trim • Finish: US26D • Available with “clutch type” lever, Specify ML “C”.

• Dead bolt

Note: Different template required. Clutch only available with 06 lever.

• Latch bolt

• Guard bolt • Stop works

CODE COMPLIANCE:

• Strike

• Handing

Handed, reversible in field

• UL Listings

UL listed, 3 hour fire doors, single and pairs

• ANSI A156.13 Series 1000 Grade 1 • Listed UL10C and UBC 7.2 for positive pressure. • ANSI A117.1 ADA Barrier-free Accessibility • C-UBC California Uniform Builders Code -2001 • NFPA-80 National Fire Protection -1999 • NFPA-101National Fire Protection-Life Safety-2000

• ANSI Specification Meets all Grade 1 security,

operational, dimensional and cycling requirements of ANSI/BHMA A156.13 Series 1000, Lock body conforms to Federal Standatd FF-H-106 Type 86/87

LIMITED LIFETIME WARRANTY

DAS Commercial Openings, Inc.

113

www.doorsandspecialties.com